DARTA DIGITAL AUDIO · HIGH-GAIN PREAMP PLUGIN

Frantic

A complete high-gain preamp, modeled part by part: two gain stages with zener diodes, an amp-style EQ (BASS, MID and TREBLE), PRESENCE and DEEP, and two outputs: AMP, for the front of an amplifier, and DIRECT, to go straight into a cab. Plus GATE and TIGHT.

$19

Charged in Brazilian Reais (BRL), converted from US$ 19 at the day’s exchange rate. PayPal or your card converts it back and shows the exact amount in your currency before you confirm. Download link and license key by e-mail right after payment. Windows and Mac.

Frantic - high-gain preamp pedal plugin by Darta Digital Audio

German high gain, in a pedal.

A German high-gain preamp got a pedal version, with the circuit of a full amp inside a box: gain to spare, an EQ that works like an amplifier's and the PRESENCE and DEEP controls you usually only find on the amp itself. Frantic models that circuit with the schematic's values and adds what it was missing for recording and playing on a computer: a gate that listens to the clean guitar and TIGHT for low tunings.

1

Gain that compresses before it tears

The main stage has zener diodes in the feedback loop: the sound compresses gradually before it saturates, and a second stage closes the wall. Tons of gain, with body.

2

Amp controls

BASS, MID and TREBLE in a passive EQ, just like an amplifier (each one affects the others). Then PRESENCE for the top end and DEEP for the weight of the lows.

3

Two outputs

AMP to use before an amp or an amp sim; DIRECT to use it as a complete preamp, straight into a cab or an IR.

The controls

Nine knobs, one switch and the footswitch. All of them can be automated in your DAW.

Frantic - controls

GAIN

How much signal goes into the main stage. From 1 up it’s already distortion; above that, the wall. At 0 there’s a low crunch left.

LEVEL

The pedal’s volume. At 3 it matches the level of the guitar with the pedal off; above that, up to +24 dB.

OUTPUT

AMP is the output for the input of an amplifier or an amp sim: lower and with the highs trimmed. DIRECT is the full-range output, for a power amp or a cab IR. Both have the same volume, so you can compare.

BASS, MID, TREBLE

The passive EQ after the distortion, like an amplifier’s: the three work together, and moving one changes the others. At 5, the starting point.

PRESENCE

Opens up the top end in the last stage: up to +11 dB at 2 kHz, on a shelf that starts around 250 Hz. At 0, off.

DEEP

A resonant boost around 115 Hz: at 5, +4.5 dB; at 10, up to +25 dB, a deliberately exaggerated low-end punch. At 0, off.

GATE

Closes in the pauses. It listens to the clean guitar, before the pedal, so it doesn’t eat the end of your notes. At 0 it is off.

TIGHT

Removes low end before the distortion (from 20 to 400 Hz): the lows stay firm in fast picking and low tunings. At 0, the original circuit.

FOOTSWITCH

Turns the pedal on and off, with no click. The red LED lights up with the pedal on.

Lows and presence, like an amp

After the EQ, the last stage has the two controls that put the finishing touch on the sound.

Passive EQ

BASS · MID · TREBLE

The three-band EQ of amplifiers: the three knobs work together. With MID low, the scooped sound; with MID high, the guitar stands out in the band.

Great forShaping your tone, like on the amp.
Up to +11 dB at 2 kHz

PRESENCE

Opens up the top end and the attack. Up, the guitar cuts; down, a darker, smoother sound.

Great forCutting through the mix, leads with bite.
Resonance at 115 Hz

DEEP

The weight of the lows, like a speaker cabinet pushing air. From 4 to 7, the full lows of rhythm parts; near 10, an exaggerated punch.

Great forLow tunings, heavy rhythm, palm mutes.

AMP or DIRECT

The original circuit has two outputs, and Frantic puts both on one switch.

AMP

The output for the front of an amplifier: lower and with the highs trimmed from around 1.3 kHz, as the pedal intends. Use it before an amp sim.

DIRECT

The full-range output, for a power amp or an effects return: Frantic becomes the whole preamp. Use it straight into a cab IR.

16 presets to start with

In four categories. And you can save your own with SAVE, compare two settings with A and B, and undo with UNDO.

Crunch · 4

DefaultEdge CrunchRock RhythmClean Push

Rhythm · 4

German ChugTight Palm MuteWall of GainScooped Thrash

Lead · 4

Singing LeadSmooth LeadShred LeadDark Lead

Special · 4

Deep DoomBright CutDirect PreampLow Tuned Seven

Tips to get the most out of it

Ideas to get started.

Start at 3

With LEVEL at 3, switching the pedal on and off doesn’t change the volume, so you judge the sound, not the loudness.

The right output

Before an amp sim, use AMP. Straight into a cab IR, use DIRECT: AMP with no amp after it sounds muffled.

Low tunings

TIGHT at 7 and GATE at 6: the lows stay firm and the pauses stay dry.

Weight without mud

DEEP between 5 and 7 with BASS at 6. Near 10, DEEP is an effect: use it with care.

A lead that sings

GAIN 8 and MID 7: the note comes forward and sustains.

Crunch

GAIN between 0 and 2: the pedal’s crunch, for heavy rock. The Crunch presets are a good start.

Under the hood

Checked against circuit simulation

Each stage was compared with SPICE, the circuit simulator engineers use: the linear parts match within 0.34 dB and, with distortion, the spectrum matches within ±0.3 dB up to 4 kHz.

Modeled circuit

The op-amps have the voltage, speed and bandwidth limits of the real part; the zeners and diodes are solved sample by sample. The EQ is calculated as a circuit: the knobs turn without clicks.

16x oversampling

The distortion runs at 16x your DAW's rate, so the highs stay clean.

Gate before the pedal

The gate listens to the clean guitar, before the pedal, and only closes what comes after it: notes end naturally.

Try before you buy

Download the trial with everything unlocked: every control, all 16 presets and the standalone app with amp and cabinet. The only difference is that the sound drops out for 3 seconds every 45 seconds and presets can’t be saved. Like it? Buy a license and paste the key into the plugin, no reinstall needed.

Your data stays with Darta. Privacy policy.

Windows 10 and 11 (VST3 and standalone) and macOS 10.15 or newer (AU, VST3 and standalone).

Specifications

System

Windows 10 or 11, 64-bit. macOS 10.15 or newer (Intel and Apple Silicon).

Formats

Windows: VST3 and standalone application. Mac: AU, VST3 and standalone application.

License

One license key activates up to 2 computers. Once activated, it works offline.

Controls

Gain, Level, Bass, Mid, Treble, Presence, Deep, Output, Gate, Tight and footswitch.

Channels

Mono or stereo. A mono guitar comes out on both sides.

FAQ

Which pedal is it based on?

On the Diezel VH4, the pedal version of a German high-gain preamp. Diezel and VH4 are trademarks of their respective owners; Darta is not affiliated with them and the names are used here only to describe the style of sound.

Should I use the AMP or the DIRECT output?

It depends on what comes next. Before an amplifier or an amp sim, use AMP. Straight into a cab IR, or into a power amp, use DIRECT. Both have the same volume.

Does it work with low tunings and 7-string guitars?

Yes. Use TIGHT to keep the lows from getting muddy and GATE to keep the pauses dry.

Is there latency?

Only 5 samples (about 0.1 ms at 48 kHz), because of the oversampling: imperceptible. The bypassed sound is delayed by the same amount, so switching on and off sounds seamless.

Is there a Mac version?

Yes. FRANTIC runs natively on Apple Silicon and Intel Macs, macOS 10.15 or newer, as AU, VST3 and standalone.

Do I need internet to use it?

Only to activate it. After that, FRANTIC works offline.

Can I use it on more than one computer?

Yes, each license key activates up to 2 computers. To move it, deactivate it on the old computer from inside the plugin.

How do I get the plugin?

Right after payment, you get the download link and your license key by e-mail. Both are also in My account.

What currency will I be charged in?

Darta is based in Brazil, so checkout is in Brazilian Reais (BRL): the US$ 19 price is converted at the day’s exchange rate. PayPal or your card issuer converts it back automatically and shows the exact amount in your currency before you confirm. Depending on their conversion rate, the final amount may differ slightly from US$ 19.

Can I play without a DAW?

Yes. The standalone app comes with a clean amp (VOLUME, BASS, MIDDLE and TREBLE) and a 1×12 cabinet, or your own IR. Just plug your guitar into your audio interface and play. In your DAW, the plugin is just the pedal, so you can use any amp and cabinet you like.

Is there a trial version?

Yes. Leave your e-mail under Try before you buy and download it right away. Everything works; the sound just drops out for 3 seconds every 45 seconds and presets can’t be saved. Once you buy, just paste the key into the plugin.

German high gain, in a pedal.

$19

Charged in Brazilian Reais (BRL), converted from US$ 19 at the day’s exchange rate. PayPal or your card converts it back and shows the exact amount in your currency before you confirm. Download link and license key by e-mail right after payment.