DARTA DIGITAL AUDIO · DISTORTION PEDAL PLUGIN
The Darta Effects distortion pedal, now as a plugin: a transistor preamp pushing an LM386 flat out, and a passive 3-band tone stack. Raw, full and heavy.
Charged in Brazilian Reais (BRL), converted from US$ 19 at the day’s exchange rate. PayPal or your card converts it back and shows the exact amount in your currency before you confirm. Download link and license key by e-mail right after payment. Windows and Mac.

Heavy as a war club.
TACAPE was born at Darta Effects, our pedal line. A transistor at the input adds bite and pushes an LM386, the little power amp that, wired for maximum gain, turns into a raw, full distortion. After it, a passive 3-band tone stack shapes the sound, like in an amp. The plugin models that circuit from the schematic values, part by part, and adds a gate that listens to the clean guitar.
Transistor up front
The transistor preamp has more gain in the highs than in the lows: your attack arrives with bite before the distortion.
An LM386 flat out
The chip runs at maximum gain, close to 500 times: a raw, full saturation, with the real chip’s asymmetric output limits.
Passive tone stack
BASS, MID and TREBLE after the distortion, like in an amp: they cut and shape without sounding digital.
The controls
Six knobs and one footswitch. All of them can be automated in your DAW.

GAIN
How hard the preamp pushes the LM386. Low, an open crunch; high, full distortion.
BASS
The lows of the passive tone stack.
MID
The mids of the passive tone stack. Low, a scooped sound; high, mids in your face.
TREBLE
The highs of the passive tone stack.
LEVEL
The pedal volume. At 3 it matches the guitar with the pedal off; above that you get up to +24 dB.
GATE
Closes in the pauses. It listens to the clean guitar, before the pedal, so it doesn’t eat the end of your notes. At 0 it’s off.
FOOTSWITCH
ON turns the pedal on without a click (red LED).
17 presets to start with
In four categories. And you can save your own with the SAVE button, compare two settings with A and B, and undo with UNDO.
Crunch · 4
Drive · 4
Distortion · 5
Lead · 4
Tips to get the most out of it
Ideas to get you started.
Start at 3
With LEVEL at 3, switching the pedal on and off doesn’t change the volume: you judge the sound, not the loudness.
In front of a clean sound
It’s made for the input of a clean amp. In an amp simulator, pick a clean channel; straight into a cabinet IR works too.
Crunch
GAIN between 1.5 and 3: the LM386 just starts to saturate and the sound stays open. Try the Low Crunch preset.
Scooped
BASS at 7, MID at 1 and TREBLE at 7, with GATE at 5. Try the Scooped preset.
Thrash
GAIN at 8, MID at 3, TREBLE at 7 and GATE at 6. Try the Thrash preset.
Mids that cut through
MID at 7 or more: your solo doesn’t disappear behind the band. Try the Cutting Lead preset.
Under the hood
A real transistor
The input transistor follows the part’s curves, solved every sample.
Inside the LM386
The chip is modeled from its internal circuit: gain and output limits change with the signal, like the real one.
The tone stack as a load
The tone stack and the volume load the LM386 output in the same calculation, like in the pedal.
16x oversampling
The distortion runs at 16x your DAW’s rate, so the highs stay clean.
Try before you buy
Download the trial with everything unlocked: every control, all 17 presets and the standalone app with amp and cabinet. The only difference is that the sound drops out for 3 seconds every 45 seconds and presets can’t be saved. Like it? Buy a license and paste the key into the plugin, no reinstall needed.
Windows 10 and 11 (VST3 and standalone) and macOS 10.15 or newer (AU, VST3 and standalone).
Specifications
System
Windows 10 or 11, 64-bit. macOS 10.15 or newer (Intel and Apple Silicon).
Formats
Windows: VST3 and standalone application. Mac: AU, VST3 and standalone application.
License
One license key activates up to 2 computers. Once activated, it works offline.
Controls
Gain, Bass, Mid, Treble, Level, Gate and the On footswitch.
Channels
Mono or stereo. A mono guitar comes out on both sides.
FAQ
Which pedal is it based on?
On TACAPE by Darta Effects, our pedal line. The plugin follows the pedal’s schematic, with the same controls; the GATE is a plugin extra.
Does it do clean?
No: it’s a distortion. For the least gain, use a low GAIN (try the Low Crunch preset) and turn your guitar volume down.
Is there any latency?
Only 5 samples (about 0.1 ms at 48 kHz), because of the oversampling: inaudible. The bypassed sound is delayed the same way, so there’s no difference when you switch it on and off.
Is there a Mac version?
Yes. TACAPE runs natively on Apple Silicon and Intel Macs, macOS 10.15 or newer, as AU, VST3 and standalone.
Do I need internet to use it?
Only to activate it. After that, TACAPE works offline.
Can I use it on more than one computer?
Yes, each license key activates up to 2 computers. To move it, deactivate it on the old computer from inside the plugin.
How do I get the plugin?
Right after payment, you get the download link and your license key by e-mail. Both are also in My account.
What currency will I be charged in?
Darta is based in Brazil, so checkout is in Brazilian Reais (BRL): the US$ 19 price is converted at the day’s exchange rate. PayPal or your card issuer converts it back automatically and shows the exact amount in your currency before you confirm. Depending on their conversion rate, the final amount may differ slightly from US$ 19.
Can I play without a DAW?
Yes. The standalone app comes with a clean amp (VOLUME, BASS, MIDDLE and TREBLE) and a 1×12 cabinet, or your own IR. Just plug your guitar into your audio interface and play. In your DAW, the plugin is just the pedal, so you can use any amp and cabinet you like.
Is there a trial version?
Yes. Leave your e-mail under Try before you buy and download it right away. Everything works; the sound just drops out for 3 seconds every 45 seconds and presets can’t be saved. Once you buy, just paste the key into the plugin.
Heavy as a war club.
Charged in Brazilian Reais (BRL), converted from US$ 19 at the day’s exchange rate. PayPal or your card converts it back and shows the exact amount in your currency before you confirm. Download link and license key by e-mail right after payment.

