DARTA DIGITAL AUDIO · HIGH-GAIN DRIVE PLUGIN

INTO THE VOID

A wall of saturation for slow, heavy riffs: a silicon booster at the input, with RANGE to go from cutting treble to full range, two JFET stages with huge gain and a GATE that listens to the clean guitar.

$19

Charged in Brazilian Reais (BRL), converted from US$ 19 at the day’s exchange rate. PayPal or your card converts it back and shows the exact amount in your currency before you confirm. Download link and license key by e-mail right after payment. Windows and Mac.

INTO THE VOID - high-gain drive pedal plugin by Darta Digital Audio

The weight of doom, in a pedal.

Doom was born from slow, down-tuned riffs, with a guitar that sounds bigger than the room. The INTO THE VOID circuit goes after that weight with a silicon transistor that boosts the guitar at the input and two JFET stages with active loads, which give so much gain that the sound almost turns into a square wave. INTO THE VOID models that circuit with the schematic's values, part by part, and adds a gate that listens to the clean guitar.

1

A booster at the input

A silicon transistor boosts the guitar before the distortion. RANGE picks how much low end gets in: from treble booster to full range.

2

Gain to spare

Two JFET stages, each with another JFET as its load: close to 65 dB of gain. It saturates with any guitar.

3

Six transistors

One silicon transistor and five JFETs, each modeled with its own curves and all solved together at every sample.

The controls

Five knobs and one footswitch. All of them can be automated in your DAW.

INTO THE VOID - controls

GAIN

Sits between the two JFET stages. The sound already breaks up at 0; turning it up, the saturation gets denser and more compressed. It changes the texture more than the volume.

RANGE

Picks how much low end goes into the booster. At 0 only the highs get through, like a treble booster; at 10, full range: more bass and more drive.

LEVEL

The pedal’s volume. At 3 it matches the level of the guitar with the pedal off; above that, up to +24 dB.

PRESENCE

A high cut at the output. At 10, the most sparkle; at 0, the sound gets dark and thick, with the cut around 1.6 kHz.

GATE

Closes in the pauses. It listens to the clean guitar, before the pedal, so it doesn’t eat the end of your notes. At 0 it is off.

FOOTSWITCH

ON turns the pedal on with no click. The LED next to it lights up when it’s on.

Inside the circuit

The signal path, recreated part by part, in the same order.

RANGE

INPUT BOOSTER

A silicon transistor takes the guitar and boosts it. In front of it, RANGE picks how much low end gets through.

Great forThe attack: from cutting treble to full range.
GAIN

TWO JFET STAGES

Each stage is a JFET with another JFET as its load, which gives huge gain. GAIN sits between the two.

Great forThe wall of saturation.
PRESENCE

TONE AND OUTPUT

A fixed tone network shapes the sound, a JFET feeds the output and PRESENCE cuts the highs at the end.

Great forThe final tone, from dark to bright.

RANGE, end to end

Three ways to use the same pedal.

RANGE 0

Only the highs go into the booster: the low end stays out before the distortion and the sound gets cut, like a treble booster in front of a drive. Try the Treble Boost and Thin Edge presets.

RANGE 5

Halfway: body without mud, great for rhythm parts with fast picking. Try the Default and Bright Rhythm presets.

RANGE 10

Full range: all the low end gets in, the drive goes up and the sound gets huge. This is where doom lives. Try the Doom Riff and Dark Sludge presets.

16 presets to start with

In four categories. And you can save your own with SAVE, compare two settings with A and B, and undo with UNDO.

Crunch · 4

DefaultLow Gain CrunchTreble BoostClassic Crunch

Rhythm · 4

Heavy RhythmTight RhythmDoom RiffBright Rhythm

Lead · 4

Singing LeadSmooth LeadCutting LeadWarm Solo

Special · 4

Max GainThin EdgeDark SludgeGentle Drive

Tips to get the most out of it

Ideas to get started.

Start at 3

With LEVEL at 3, switching the pedal on and off doesn’t change the volume, so you judge the sound, not the loudness.

In front of a clean sound

Use a clean amp or a clean channel in your amp sim; straight into a 4×12 cab IR also works great.

Your guitar's volume

The input booster responds to how hard you hit it: roll back your guitar’s volume and the drive goes down.

The slow riff

RANGE at 10, GAIN at 8, PRESENCE at 4 and GATE at 4. Try the Doom Riff preset.

A singing solo

RANGE at 8, GAIN at 9 and PRESENCE at 6. Try the Singing Lead preset.

All the sludge

RANGE and GAIN at 10, PRESENCE at 0 and GATE at 5. Try the Dark Sludge preset.

Under the hood

Checked against circuit simulation

The circuit was compared with SPICE, the circuit simulator engineers use: the frequency response matches within 0.16 dB up to 20 kHz and, with distortion, the output stays within 0.11%.

Real transistors

The silicon transistor and the five JFETs follow the parts' models, with the gate diodes, and are all solved together at every sample.

With the schematic's values

Every resistor and capacitor of the original circuit, plus the transistor capacitances that make a difference in the sound.

8x oversampling

The distortion runs at 8x your DAW's rate, so the highs stay clean even at full gain.

Try before you buy

Download the trial with everything unlocked: every control, all 16 presets and the standalone app with amp and cabinet. The only difference is that the sound drops out for 3 seconds every 45 seconds and presets can’t be saved. Like it? Buy a license and paste the key into the plugin, no reinstall needed.

Your data stays with Darta. Privacy policy.

Windows 10 and 11 (VST3 and standalone) and macOS 10.15 or newer (AU, VST3 and standalone).

Specifications

System

Windows 10 or 11, 64-bit. macOS 10.15 or newer (Intel and Apple Silicon).

Formats

Windows: VST3 and standalone application. Mac: AU, VST3 and standalone application.

License

One license key activates up to 2 computers. Once activated, it works offline.

Controls

Gain, Range, Level, Presence, Gate and the On footswitch.

Channels

Mono or stereo. A mono guitar comes out on both sides.

FAQ

Which gear is it based on?

On a high-gain pedal circuit with a silicon booster at the input and JFET stages with active loads, built for the heavy sound of doom and early-70s metal.

Does it have a clean sound?

No: the circuit has close to 65 dB of gain and saturates with any guitar, even with GAIN at 0. For the least drive, try the Gentle Drive preset and roll back your guitar’s volume.

Does it work with low tunings?

Yes. With RANGE at 10 all the low end gets in; if the low notes get muddy, turn RANGE down a little to tighten them.

Is there latency?

Only 5 samples (about 0.1 ms at 48 kHz), because of the oversampling: imperceptible. The bypassed sound is delayed by the same amount, so switching on and off sounds seamless.

Is there a Mac version?

Yes. INTO THE VOID runs natively on Apple Silicon and Intel Macs, macOS 10.15 or newer, as AU, VST3 and standalone.

Do I need internet to use it?

Only to activate it. After that, INTO THE VOID works offline.

Can I use it on more than one computer?

Yes, each license key activates up to 2 computers. To move it, deactivate it on the old computer from inside the plugin.

How do I get the plugin?

Right after payment, you get the download link and your license key by e-mail. Both are also in My account.

What currency will I be charged in?

Darta is based in Brazil, so checkout is in Brazilian Reais (BRL): the US$ 19 price is converted at the day’s exchange rate. PayPal or your card issuer converts it back automatically and shows the exact amount in your currency before you confirm. Depending on their conversion rate, the final amount may differ slightly from US$ 19.

Can I play without a DAW?

Yes. The standalone app comes with a clean amp (VOLUME, BASS, MIDDLE and TREBLE) and a 1×12 cabinet, or your own IR. Just plug your guitar into your audio interface and play. In your DAW, the plugin is just the pedal, so you can use any amp and cabinet you like.

Is there a trial version?

Yes. Leave your e-mail under Try before you buy and download it right away. Everything works; the sound just drops out for 3 seconds every 45 seconds and presets can’t be saved. Once you buy, just paste the key into the plugin.

The weight of doom, in a pedal.

$19

Charged in Brazilian Reais (BRL), converted from US$ 19 at the day’s exchange rate. PayPal or your card converts it back and shows the exact amount in your currency before you confirm. Download link and license key by e-mail right after payment.