DARTA DIGITAL AUDIO · "BROWN SOUND" DRIVE PLUGIN

Stripes

The warm, saturated, mid-heavy tone of late-70s and 80s hard rock, in an all-JFET pedal: two very high-gain stages, TONE and CONTOUR to shape the sound, the BOOST and BRIGHT switches and a GATE that listens to the clean guitar.

$19

Charged in Brazilian Reais (BRL), converted from US$ 19 at the day’s exchange rate. PayPal or your card converts it back and shows the exact amount in your currency before you confirm. Download link and license key by e-mail right after payment. Windows and Mac.

Stripes - brown sound drive pedal plugin by Darta Digital Audio

The "brown sound", in a pedal.

In the late 70s, one guitar sound changed hard rock: a British amp pushed to the edge, warm, saturated and with the mids up front, which became known as the "brown sound". The Stripes circuit goes after that tone with six JFET transistors, which saturate a lot like tubes. Stripes models that circuit with the schematic's values, part by part, and adds a gate that listens to the clean guitar.

1

Gain to spare

Two very high-gain stages, one after the other, with GAIN between them. Even at low settings the sound breaks up, like the circuit.

2

Shape the sound

TONE blends a bass path and a treble path; CONTOUR moves from mids up front to a darker, scooped sound.

3

All JFET

Six JFET transistors play the role of the tubes, each modeled with its own curves and solved at every sample.

The controls

Five knobs, two switches and one footswitch. All of them can be automated in your DAW.

Stripes - controls

GAIN

Sits between the two gain stages. Even at low numbers the sound breaks up, like the circuit. At 0, silent; at 10, full gain.

TONE

Blends a bass path and a treble path. Low, darker; high, brighter. Around the middle some mids drop out, like the circuit.

LEVEL

The pedal’s volume. At 3 it matches the level of the guitar with the pedal off; above that, up to +24 dB.

BOOST

Switch. On, it changes the gain structure of both stages: more gain and more saturation, not just more volume.

CONTOUR

At 0, the mids come forward; at 10, the sound gets darker and scooped.

BRIGHT

Switch. On, a capacitor skips part of the tone network and the sound gets more top end.

GATE

Closes in the pauses. It listens to the clean guitar, before the pedal, so it doesn’t eat the end of your notes. At 0 it is off.

FOOTSWITCH

ON turns the pedal on with no click. The LED next to it lights up when it’s on.

Inside the circuit

The signal path, recreated with JFETs, in the same order.

High gain

STAGE 1

Two stacked JFETs, one acting as the load for the other: this stage alone gives more than 40 dB of gain. The BOOST switch changes its bias.

Great forThe attack and the input saturation.
GAIN

STAGE 2

After GAIN, the same arrangement again, now with no capacitor on its source: it clips one side of the wave harder. BOOST changes this stage too.

Great forThe body and sustain of the drive.
TONE · CONTOUR · BRIGHT

TONE

One JFET drives the tone network (TONE, CONTOUR and the BRIGHT switch) and another JFET delivers the signal at the output.

Great forFrom mids up front to scooped.

The two switches

They change the circuit, not just the volume.

BOOST

Changes the bias of both gain stages: more gain, more saturation and more sustain, at almost the same volume (about +1 dB). Great for solos and heavier riffs. Try the Singing Lead and Boosted Chug presets.

BRIGHT

A capacitor on TONE skips part of the tone network: the sound gets more top end and definition without getting louder. Great for dark guitars and for a solo that cuts through the band. Try the Cutting Lead and Bright Edge presets.

16 presets to start with

In four categories. And you can save your own with SAVE, compare two settings with A and B, and undo with UNDO.

Crunch · 4

DefaultLow Gain CrunchBright CrunchClassic Rock

Rhythm · 4

Brown RhythmTight RhythmScooped RhythmBoosted Chug

Lead · 4

Singing LeadSmooth LeadCutting LeadWarm Solo

Special · 4

Max GainDark GrindBright EdgeGentle Drive

Tips to get the most out of it

Ideas to get started.

Start at 3

With LEVEL at 3, switching the pedal on and off doesn’t change the volume, so you judge the sound, not the loudness.

In front of a clean sound

Use a clean amp or a clean channel in your amp sim; straight into a 4×12 cab IR also works great.

Your guitar's volume

The first stage responds to how hard you hit it: roll back your guitar’s volume and the sound cleans up a bit.

The brown tone

GAIN at 6 and CONTOUR at 3: mids up front and warm saturation. Try the Brown Rhythm preset.

A singing solo

GAIN at 8, BOOST on and CONTOUR at 3. Try the Singing Lead preset.

More modern

GAIN at 7, CONTOUR at 8 and GATE at 4: scooped mids and tight pauses. Try the Scooped Rhythm preset.

Under the hood

Checked against circuit simulation

The circuit was compared with SPICE, the circuit simulator engineers use: the frequency response matches within 0.06 dB up to 20 kHz and, with distortion, the output stays within 0.12%.

Real JFETs

The six transistors follow the part's model, gate diodes included, solved at every sample. Against the full JFET model, capacitances included, the sound matches within 0.03 dB up to 4 kHz.

With the schematic's values

Every resistor and capacitor of the original circuit, including the ones that load the volume pot.

16x oversampling

The distortion runs at 16x your DAW's rate, so the highs stay clean even at full gain.

Try before you buy

Download the trial with everything unlocked: every control, all 16 presets and the standalone app with amp and cabinet. The only difference is that the sound drops out for 3 seconds every 45 seconds and presets can’t be saved. Like it? Buy a license and paste the key into the plugin, no reinstall needed.

Your data stays with Darta. Privacy policy.

Windows 10 and 11 (VST3 and standalone) and macOS 10.15 or newer (AU, VST3 and standalone).

Specifications

System

Windows 10 or 11, 64-bit. macOS 10.15 or newer (Intel and Apple Silicon).

Formats

Windows: VST3 and standalone application. Mac: AU, VST3 and standalone application.

License

One license key activates up to 2 computers. Once activated, it works offline.

Controls

Gain, Tone, Level, Contour, Gate, the Boost and Bright switches and the On footswitch.

Channels

Mono or stereo. A mono guitar comes out on both sides.

FAQ

Which gear is it based on?

On the Wampler Pinnacle, an all-JFET distortion pedal built for the “brown sound”. Wampler and Pinnacle are trademarks of their respective owners; Darta is not affiliated with them and the names are used here only to describe the style of sound.

Does it have a clean sound?

No: it’s a high-gain drive, and the stages saturate even with GAIN low. For the least gain, set GAIN to 1 (try the Gentle Drive preset) and roll back your guitar’s volume.

Is BOOST just more volume?

No. It changes the bias of both gain stages, like the circuit: gain and saturation go up, and the volume barely changes.

Is there latency?

Only 5 samples (about 0.1 ms at 48 kHz), because of the oversampling: imperceptible. The bypassed sound is delayed by the same amount, so switching on and off sounds seamless.

Is there a Mac version?

Yes. STRIPES runs natively on Apple Silicon and Intel Macs, macOS 10.15 or newer, as AU, VST3 and standalone.

Do I need internet to use it?

Only to activate it. After that, STRIPES works offline.

Can I use it on more than one computer?

Yes, each license key activates up to 2 computers. To move it, deactivate it on the old computer from inside the plugin.

How do I get the plugin?

Right after payment, you get the download link and your license key by e-mail. Both are also in My account.

What currency will I be charged in?

Darta is based in Brazil, so checkout is in Brazilian Reais (BRL): the US$ 19 price is converted at the day’s exchange rate. PayPal or your card issuer converts it back automatically and shows the exact amount in your currency before you confirm. Depending on their conversion rate, the final amount may differ slightly from US$ 19.

Can I play without a DAW?

Yes. The standalone app comes with a clean amp (VOLUME, BASS, MIDDLE and TREBLE) and a 1×12 cabinet, or your own IR. Just plug your guitar into your audio interface and play. In your DAW, the plugin is just the pedal, so you can use any amp and cabinet you like.

Is there a trial version?

Yes. Leave your e-mail under Try before you buy and download it right away. Everything works; the sound just drops out for 3 seconds every 45 seconds and presets can’t be saved. Once you buy, just paste the key into the plugin.

The "brown sound", in a pedal.

$19

Charged in Brazilian Reais (BRL), converted from US$ 19 at the day’s exchange rate. PayPal or your card converts it back and shows the exact amount in your currency before you confirm. Download link and license key by e-mail right after payment.